| 1. | Study on the static adsorption properties and optimum parameters determination of macroporous resins to purple sweet potato pigments
大孔树脂对紫甘薯色素的静态吸附参数研究 |
| 2. | Tuned to the optimum parameters , the vstmd reduces the top deck acceleration by 21 % averagely
经过多组数据的计算、分析、总结，本文提出了一种简便的控制器最佳刚度优化方法。 |
| 3. | The polymerization potential 0 . 48 v and 24 % polyaniline in enzyme film were optimum parameters for the sensor construction
传感器制作的最佳条件为：聚合电位0 . 48v ，复合膜中聚苯胺含量24 。 |
| 4. | Conclusion using optimum parameters for measurement , the fluorescent intensity was not only stronger but also more stable
结论使用优化的测试条件分析化探样中的芳烃，其荧光强度更强、更稳定。 |
| 5. | Once the optimum parameters are set , the physical dimensions , weight and other physical properties of the part will stay almost constant
一旦设定了合适的成型参数，产品的实体尺寸，重量和其他物理性能将保持稳定。 |
| 6. | Abstract : the author discusses optimal operating model for predictive control and optimum parameter . based on that model , a algorithm is obtained
文摘:对预测控制模型的建立、滚动优化计算及优化参数的选取进行了理论探讨。 |
| 7. | Eventually with the optimizing method , primarily to the maximum flow , this paper makes an account of the researches on the optimum parameters of the gear geometry of gear pumps
最后利用优化方法，以齿轮泵流量最大为目标函数对轮齿的齿形参数进行了优化设计。 |
| 8. | As the general method , simplex method is widely used in thermoprocess control system . but it is sensitive to initial value and gets easily into partial optimum parameters , leads to failure
在热工系统中，常规优化方法? ?单纯形法虽然已被广泛应用，但是它对寻优参数的初值很敏感，初值不当，可能导致寻优失败。 |
| 9. | With the optimum parameter , the obtained composite particle have many changes compared with uncoated graphite , such as the increase of coating ratio , particle size and decrease of specific surface area , et al
在最佳包覆工艺条件下，所得复合粉体相对未处理石墨氧化物含量(包覆率)增加、粒度增大与表面积减小。 |
